Previous
MONO6 10

MONO6 10

$ 1,690.00
Next

MONO6 20

$ 3,990.00
MONO6 20

MONO6 6

$ 599.00

MONO6 6

$ 599.00

MONO6 6 is our six elements high performance antenna for the magic band of 50 MHz optimized for DX! With only 9 kg/20 lb in weight, it is to handle during installations. Thanks to its optimized size and spacing elements, it easily covers the entire operating band with a flat SWR curve of less than 1.5:1, excellent front-to-back ratio and excellent gain. Its excellent mechanical characteristics, together with its excellent performance, make the MONO6 6 a perfect antenna even for the most demanding pileups.

Requires a rotor for light load

RF choke: 2kW included

Availability: in stock

2kW RF choke SO239 PLUG INCLUDED
If you prefer,
choose below a different RF choke:

Description

MONO6 6Band 6 m
Gain dBi:
(20 meters above the ground)
17.3
Gain dBd free space:9.55
F/B:25
Active elements:6
Bandwidth KHz
S.W.R. ≤ 1.5:1
500
Boom Length:645 cm/21 ft
Turning radius:400 cm/13 ft
Feed lines required:1 X 50 Ohm
Max tower lift side:60 cm/2 ft

Longest element:
300 cm/9.85 ft

Power handling:
10 kW

Wind area:
0.35 m²/3.76 sq ft

Wind load 130Km/h:
767 N

Wind survival*:
100 Kmh/55 Mph

Mast diameter: 50 mm/2 inch (larger on request)

RF choke**:
2 kW included

Weight (excluding packaging):
9 Kg/20 lb

Materials used

Tubes and plates:
Aluminum alloy 6060T6

Hardware:
stainless and galvanized steel

insulating clamps:
polypropylene UV resistant

Manual:
English

*Wind survival is the maximum wind speed to which the antenna can be subjected without incurring permanent deformation (calculated in the absence of ice)

**The Momobeam RF Choke (standard product offering, rated at 3 KW) is made from high quality Teflon dielectric, double shielded, low loss coaxial cable with properly selected ferrite material that is sleeved over the cable that together, create a high impedance path for RF, providing high isolation between the antenna and coaxial feedline.

An SO-239 female connector is included for convenient attachment to the customer feedline and its PL-259 Male connector.

The 5 KW and 10 KW rated RF chokes (optional purchase) are made from the same materials except the coaxial cable is 10 mm diameter.

The 10KW version uses a 7/16 DIN style connector.

Get the manual
Icon

Inserire Manuale 343.87 KB 415 downloads

inserire disclaimer   ...
Do you need MORE INFO about this product?
Write us now!

    Plese fill in all the required fields, marked with *

    1500 remaining characters.

    CONSENT TO PERSONAL DATA PROCESSING (required)

    You can ask at any time personal data erasure or access, by sending a request to the Data Controller.

    Reviews

    There are no reviews yet.

    Be the first to review “MONO6 6”

    Shopping cart

    0
    image/svg+xml

    No products in the cart.

    Continue Shopping