For US market: 
contact him by WADescription
| MONO6 6HD | Band 6 m |
|---|---|
| Gain dBi: (20 meters above the ground) | 17.05 |
| Gain dBd free space: | 9.15 |
| F/B: | 22 |
| Active elements: | 6 |
| Bandwidth KHz S.W.R. ≤ 1.5:1 | 500 |
| Boom Length: | 630 cm/20.6 ft |
| Turning radius: | 400 cm/13 ft |
| Feed lines required: | 1 X 50 Ohm |
| Max tower lift side: | 60 cm/2 ft |
Longest element:
300 cm/9.85 ft
Power handling:
10 kW
Wind area:
0.35 m²/3.76 sq ft
Wind load 130Km/h:
767 N
Wind survival*:
160 Kmh – 100 Mph
Mast diameter: 50/60 mm – 2/2.36 inch
(larger on request – specify on order form)
RF Choke**: 2 KW included
Weight (excluding packaging):
15 Kg/33 lb
Materials used
Tubes and plates:
Aluminum alloy 6061T6
Hardware:
stainless and galvanized steel
insulating clamps:
polypropylene UV resistant
Manual:
English
*Wind survival is the maximum wind speed to which the antenna can be subjected without incurring permanent deformation (calculated in the absence of ice)
**The Momobeam RF Choke (standard product offering, rated at 3 KW) is made from high quality Teflon dielectric, double shielded, low loss coaxial cable with properly selected ferrite material that is sleeved over the cable that together, create a high impedance path for RF, providing high isolation between the antenna and coaxial feedline.
An SO-239 female connector is included for convenient attachment to the customer feedline and its PL-259 Male connector.
The 5 KW and 10 KW rated RF chokes (optional purchase) are made from the same materials except the coaxial cable is 10 mm diameter.
The 10KW version uses a 7/16 DIN style connector.
Get the manual
Reviews
There are no reviews yet.