Previous
DUO9 1015 DUALBAND

DUO9 10/15

$ 1,590.00
Next

MONO3 6 PORTABLE

$ 229.95
MONO3 6 Portable 50 MHz yagi
MONO3 40FS full size yagi for 40 meter band

MONO3 40 FS

$ 5,500.00

MONO3 40 FS

$ 5,500.00

MONO3 40 is a 3 elements monoband full size Yagi for the 7 MHz!
It has a good VSWR < 1:1.5 on 300 kHz, very good gain and good F/B ratio.

No hairpins, or other devices are used to feed the antenna! You will need a good RF Choke (provided) to connect the coaxial cable to the antenna.

MONO3 40FS will be very easy to assemble thanks to the grouping and labeling of components. All hardware has been bagged by its group and labeled for quick identification!

Its construction is heavy duty type!
The element plates are made of thick U-shaped aluminum, and the elements are made more solid by horizontal and vertical tie rods!

Given the imposing size of this antenna, special mechanical solutions have been adopted to make it solid and durable.
It has a square boom made of thick aluminum, and the elements are telescopic with a starting diameter of 60mm / 2,36 inch

Mounting: Requires a rotor for large load

RF choke: 3kW included

Availability: call

For US market:
more questions? call Mark K1RX

 603-973-5963 | 
contact him by WA | 
 send an email

Available on backorder

4 U-bolt 50/60 mm (2-2.3 in) INCLUDED
If you need larger ones,
please choose below:

3kW RF choke SO239 PLUG INCLUDED
If you prefer,
choose below a different RF choke:

SKU: MONO3 40 FS Categories: , , , ,

Description

MONO3 40Band 40 m
Gain dBi: (20 meters above the ground)11.3
Gain dBd free space:4.5
F/B:20
Active elements:3
Bandwidth KHz S.W.R. ≤ 1.5:1300
Boom Length:12 m/40 ft
Turning radius:13 m/42.6 ft
Feed lines required:1 X 50 Ohm
Max tower lift side:90 cm/2.95 ft

Longest element:
23 m/75.45 ft

Power handling:
10 kW

Wind area:
2.1 m²/22.6 sq ft

Wind load 130Km/h:
482 N

Wind survival*:
160 Kmh – 100 Mph

Tower Leg/Mast diameter: 50/60 mm – 2/2.4 inch (larger on request – specify on order form)

RF choke**:
3 KW included

Weight (excluding packaging):
150 Kg/330 lb

Materials used

Tubes and plates:
Aluminum alloy 6060T6

Hardware:
stainless steel

insulating clamps:
polypropylene UV resistant

Manual:
English

*Wind survival is the maximum wind speed to which the antenna can be subjected without incurring permanent deformation (calculated in the absence of ice)

**The Momobeam RF Choke (standard product offering, rated at 3 KW) is made from high quality Teflon dielectric, double shielded, low loss coaxial cable with properly selected ferrite material that is sleeved over the cable that together, create a high impedance path for RF, providing high isolation between the antenna and coaxial feedline.

An SO-239 female connector is included for convenient attachment to the customer feedline and its PL-259 Male connector.

The 5 KW and 10 KW rated RF chokes (optional purchase) are made from the same materials except the coaxial cable is 10 mm diameter.

The 10KW version uses a 7/16 DIN style connector.

Get the manual
Icon

Inserire Manuale 343.87 KB 415 downloads

inserire disclaimer   ...
Do you need MORE INFO about this product?
Write us now!

    Plese fill in all the required fields, marked with *

    1500 remaining characters.

    CONSENT TO PERSONAL DATA PROCESSING (required)

    You can ask at any time personal data erasure or access, by sending a request to the Data Controller.

    Reviews

    There are no reviews yet.

    Be the first to review “MONO3 40 FS”

    Shopping cart

    0
    image/svg+xml

    No products in the cart.

    Continue Shopping