Previous
Previous Product Image

TRI9 12/17/30

$ 2,890.00
Next

MONO3 20

$ 990.00
Next Product Image

MONO2 40T

$ 2,390.00

MONO2 40T

$ 2,390.00

MONO2 40T is an antenna for the 40 meter band (7 MHz) designed for maximum performance. It has a Reflector / Driver configuration.
The length of the elements has been compacted using shortening techniques found in the W6NL-style yagi. This solution allows maximum performance as a fullsize antenna but in a smaller size. No traps or loading coils are used – direct feed (via an RF Choke) with a single 50 Ohm cable.

MONO2 40T comes with an Assembly Tool and spare parts (bolts and a pair of aluminium tubes).
The 3kW RF Choke balun is also supplied as standard. This component is very expensive and many antenna manufacturers supply it as an optional extra.

Requires a rotor for medium load

RF choke: 3kW included

Availability: call

For US market:
more questions? call Mark K1RX

 603-973-5963 | 
contact him by WA | 
 send an email

2 U-bolt 50/60 mm (2-2.3 in) INCLUDED
If you need larger ones,
please choose below:

3kW RF choke SO239 PLUG INCLUDED
If you prefer,
choose below a different RF choke:

Description

MONO 2 40TBand 40 m
Gain dBi
(20 meters above the ground)
10.9
Gain dBd free space:4.2
F/B:25
Active elements:2
Bandwidth kHz
S.W.R. ≤ 1.5:1
200
Boom Length:600 cm/20 ft
Turning radius:920 cm/30.18 ft
Feed line required:1 X 50 Ohm
Max tower lift side:400 cm/13.12 ft

Longest element:
1700 cm/55.77 ft

Power handling:
10 kW

Wind area:
0.63 m²/7 sq ft

Wind survival*:
160 Kmh – 100 Mph

Tower Leg/Mast diameter: 50/60 mm – 2/2.36 inch (larger on request – specify on order form)

RF Choke:
3 KW rated included

Weight (excluding packaging):
45 Kg/ 99lb

Materials used

Tubes and plates:
Aluminum alloy 6060T6

Hardware:
stainless steel

insulating clamps:
polypropylene UV resistant

Manual:
English

*Wind survival is the maximum wind speed to which the antenna can be subjected without incurring permanent deformation (calculated in the absence of ice)

**The Momobeam RF Choke (standard product offering, rated at 3 KW) is made from high quality Teflon dielectric, double shielded, low loss coaxial cable with properly selected ferrite material that is sleeved over the cable that together, create a high impedance path for RF, providing high isolation between the antenna and coaxial feedline.

An SO-239 female connector is included for convenient attachment to the customer feedline and its PL-259 Male connector.

The 5 KW and 10 KW rated RF chokes (optional purchase) are made from the same materials except the coaxial cable is 10 mm diameter.

The 10KW version uses a 7/16 DIN style connector.

Get the manual
Icon

MONO2 40T User Manual EN 940 KB 25 downloads

User Manual MONO2 40T ...
Login is required to access this page
Do you need MORE INFO about this product?
Write us now!

    Plese fill in all the required fields, marked with *

    1500 remaining characters.

    CONSENT TO PERSONAL DATA PROCESSING (required)

    You can ask at any time personal data erasure or access, by sending a request to the Data Controller.

    Reviews

    There are no reviews yet.

    Be the first to review “MONO2 40T”

    Shopping cart

    0
    image/svg+xml

    No products in the cart.

    Continue Shopping